Monday, 03 August 2020

7 Secret Settings to Inspect Your Computer Performance After Malware Removal

The computer will also display CMOS battery failure, CMOS read error, or CMOS checksum error, etc. If this happens, you need to switch on your computer and leave it on for a day.

The CMOS settings like date and time get changed. In some instances, the date and time get set to factory default. For example, your computer date will be set to factory settings, something like 12/01/2008. The CMOS battery is a small battery fitted on the motherboard of your computer.

It keeps on showing error when connecting to the internet. You need to check whether time and date are correct. If the date and time are wrong, try correcting.

Cmos Checksum Bad – Date Time Not Set

If the computer is not showing the errors after rebooting, the CMOS battery is charging. Otherwise, you need to replace the CMOS battery. You may not be able to connect to the internet.

Then, check again; if the computer is still not connecting to the internet, you need to replace the CMOS battery. If the voltage drops between certain levels, your computer loses the memory.

  • I am able to get it to boot again if I remove the PCIE graphics card and use the internal one.
  • I have tried a little more and I am able to boot into failsafe mode and recovery mode in Windows.
  • Then I had a checksum error, and the cpu does not load beyond BIOS.
  • The change of battery did not help much still the same error (removed the old one yesterday and changed the clear CMOS jumper to clear and left it like that over night).
  • Though I am still not able to get rid of the CMOS Checksum Bad error.

When the battery is dead, the CMOS can’t store information anymore. One possibility is that you use different RAM modules in your computer. Also try to configure the BIOS for not perform a parity check.

On the original 5150 IBM PC introduced in 1981, it did not have a CMOS – BIOS settings were controlled by DIP switches on the motherboard. One of the more common causes of a checksum error is also the simplest to solve. The battery that powers the CMOS is a watch battery, and it can run other  out of power.

Way 2: Reset The Basic Input/output System (Bios)

You need to use the computer regularly to extend the life of the CMOS battery. The computer power supply increases the availability of a standby current and hence increases the life of the battery.

Set the jumper to the “clear” position, power on your computer, turn it off again, set the jumper to the original position – and you’re done. A POST error message will only display on screen if the computer is capable of booting this far. If the POST detects an error before this point, a beep code or POST code will be generated instead. Use the multimeter to check the voltage of the battery (use a digital multimeter). If the voltage is less than 3V, your computer will not remember the CMOS settings, so it is time to replace the old battery with the new CMOS battery.

Comments Off on 7 Secret Settings to Inspect Your Computer Performance After Malware Removal

July 2020

Wednesday, 15 July 2020

4 Best Ways to Restore Slow Windows Reserved Storage Productivity After Virus Removal

Users Reported The Issue Online

Your computer may run slow while doing this test, but it’s simple and effective. Memory testing could take at least 30 minutes why not find out more to hours, so this is the best way to diagnose memory as the problem.

Typically, if there’s a known issue, it will be mentioned. However, this is one of those cases where we would consider updating our BIOS.

So, what would you do to protect your data or to get your data back when such issues occur? You may recover your data with an easy-to-use, yet powerful Windows data recovery tool such as Stellar Data Recovery Professional.

Other Hardware Problems

You don’t have to worry because you are the right place. We at PCkey callout offer blue screen and booting repair services for your computer. If blue screen occurs due to software, it’s suggested to uninstall the problematic software via safe mode. Head to your motherboard or computer builders website and look under driver updates for a BIOS update.

  • Fortunately, you can often narrow down the blue screen to a problem with an update for Windows or a bad driver, incompatible software, or hardware you recently configured.
  • It could also be caused by viruses or malware infecting your computer.
  • For example, an old program, third-party security software, or corrupted installation files.
  • If this isn’t the issue and you don’t know how to begin to fix the blue screen of death, start by rebooting your computer in Safe Mode.
  • This blue screen, also called the STOP error, appears when Windows on your computer has experienced a serious problem.

Total System Care optimizes computer performance in hundreds of different ways. It looks through the registry and repairs any erroneous entries it finds. It also hunts down and eliminates malware and goes to work with the press of a button. And most importantly for you – it’s also amazingly effective at repairing blue screen errors.

Many times, random BSOD errors can be a bad memory stick. Most computers have more than one stick of memory. Remove one and see if the problem goes away, and if not, swap the other stick and again see if the problem is solved.

Instead, make a habit of going to the hardware manufacturer’s website (bookmark it too) and install the latest drivers when they become available. When you do this, make sure you uninstall the previous driver as well. Often, you will see an error that causes Windows to suffer a critical error resulting in BSOD.

If you know the specific error, you can try to fix it. Often, fixing errors as ‘critical process died in Windows‘ cause BSOD, but they are fixable. Within Event Viewer you can find and check the system and application logs for any warnings or errors which could lead you to more answers in relation to your BSOD. Microsoft frequently releases service packs and patches which might have the fix you need for your blue screen of death.

Fast start up is a hybrid shutdown feature which enables by default on windows 10 computer. In some cases, after turn off the fast startup Feature the problem System Thread Exception Not Handled BSOD Error will get solved. You have two options here, you should update these drivers to the latest version or uninstall and replace them with the new one. If you see a yellow triangle or question mark next to a device, that means Windows has detected that it has an outdated or corrupt driver. One of the most effective and powerful data recovery tool- Stellar Data Recovery Professional features a bootable recovery drive option.

Comments Off on 4 Best Ways to Restore Slow Windows Reserved Storage Productivity After Virus Removal